Lenovo ThinkSystem ST550, Руководство по установке

Страница: 73 / 136

Install a DIMM
Use this information to install a DIMM.
“ Read the
installation
Guidelines” on
page 58
“ Power off
the server for
this task” on
page 109
“ ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 59
Attention: DIMMs are sensitive to static discharge and require special handling. In addition to the standard
guidelines for Handling static-sensitive devices:
• Always wear an electrostatic-discharge strap when removing or installing DIMMs. Electrostatic-discharge
gloves can also be used.
• Never hold two or more DIMMs together so that they touch. Do not stack DIMMs directly on top of each
other during storage.
• Never touch the gold DIMM connector contacts or allow these contacts to touch the outside of the DIMM
connector housing.
• Handle DIMMs with care: never bend, twist, or drop a DIMM.
Before installing a DIMM:
1. Touch the static-protective package that contains the new DIMM to any unpainted surface on the
outside of the server. Then, take the new DIMM out of the package and place it on a static-protective
surface.
2. Ensure that you consider and follow the DIMM installation rules when performing the operation. See
“DIMM installation rules” on page 70.
To install a DIMM, complete the following steps:
Watch the procedure . A video of the installation process is available:
• Youtube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-Acsjj4tU79GzKnWG316BYn
• Youku: http://list.youku.com/albumlist/show/id_50483452
Chapter 3
.
Server hardware setup
69