Lenovo ThinkSystem SR950, Руководство по установке, Страница: 39 / 390

Table 34. Adapter LEDs (continued)
Callout Callout
11
Adapter 11 fault LED
25
ML2 x16 network adapter fault LED
12
Adapter 12 fault LED
26
Adapter 7 fault LED
13
Adapter 13 fault LED
27
Adapter 6 fault LED
14
Adapter 14 fault LED
28
Adapter 5 fault LED
Internal cable routing
Some of the components in the server have internal cables and cable connectors.
Note:
Disengage all latches, release tabs, or locks on cable connectors when you disconnect cables. Failing
to release them before removing the cables will damage the cable connectors or the cable sockets on circuit
boards, which are fragile. Any damage to the cable connectors or cable sockets might require replacing the
cables or circuit boards.
Some options, such as RAID controllers, might require additional internal cabling. See the documentation
that is provided for the option to determine any additional cabling requirements and instructions.
Cable guides
Make sure that all the cables go through the cable guides, as shown in each cabling section.
Chapter 2
.
Server components
35