Lenovo ThinkSystem NE2552E, Инструкция по применению

Страница: 334 / 574

334
NE2552E Application Guide for ENOS 8.4
Supported Applications
The following applications have been enhanced to provide IPv6 support.
 Ping
The
ping
command supports IPv6 addresses. Use the following format to ping
an IPv6 address:
ping
<host name>
|
<IPv6 address> [
-n
<tries (0 ‐ 4294967295)> ]
[
-w
<msec delay (0 ‐ 4294967295)> ] [
-l
<length (0/32 ‐ 65500/2080)> ]
[
-s
<IP source> ] [
-v
<TOS (0 ‐ 255)> ] [
-f
] [
-t
]
To ping a link ‐ local address (begins with
FE80
), provide an interface index, as
follows:
ping
<IPv6 address>
%
<Interface index> [
-n
<tries (0 ‐ 4294967295)> ]
[
-w
<msec delay (0 ‐ 4294967295)> ] [
-l
<length (0/32 ‐ 65500/2080)> ]
[
-s
<IP source> ] [
-v
<TOS (0 ‐ 255)> ] [
-f
] [
-t
]
 Traceroute
The
traceroute
command supports IPv6 addresses (but not link ‐ local
addresses).
Use the following format to perform a traceroute to an IPv6 address:
traceroute
<host name>| <IPv6 address> [< max ‐ hops (1 ‐ 32)>
[ <msec delay (1 ‐ 4294967295)> ]]
 Telnet server
The
telnet
command supports IPv6 addresses, but not link ‐ local addresses.
Use the following format to Telnet into an IPv6 interface on the switch:
telnet
<host name>| <IPv6 address> [ <port> ]
 Telnet client
The
telnet
command supports IPv6 addresses, but not link ‐ local addresses.
Use the following format to Telnet to an IPv6 address:
telnet
<host name>| <IPv6 address> [ <port> ]
 HTTP/HTTPS
The HTTP/HTTPS servers support both IPv4 and IPv6 connections.
 SSH
Secure Shell (SSH) connections over IPv6 are supported, but not link ‐ local
addresses. The following syntax is required from the client:
ssh -u
<IPv6 address>
Example:
ssh -u 2001:2:3:4:0:0:0:142
 TFTP
The TFTP commands support both IPv4 and IPv6 addresses. Link ‐ local
addresses are not supported.
 FTP
The FTP commands support both IPv4 and IPv6 addresses. Link ‐ local addresses
are not supported.