Lenovo ThinkSystem NE2552E, Инструкция по применению

Страница: 23 / 574

© Copyright Lenovo 2018 Preface
23
 Chapter 23, “Using IPsec with IPv6,” describes how to configure Internet
Protocol Security (IPsec) for securing IP communications by authenticating and
encrypting IP packets, with emphasis on Internet Key Exchange version 2, and
authentication/confidentiality for OSPFv3.
 Chapter 24, “Routing Information Protocol,” describes how the Lenovo ENOS
software implements standard Routing Information Protocol (RIP) for
exchanging TCP/IP route information with other routers.
 Chapter 25, “Internet Group Management Protocol,” describes how the Lenovo
ENOS software implements IGMP Snooping or IGMP Relay to conserve
bandwidth in a multicast ‐ switching environment.
 Chapter 26, “Multicast Listener Discovery,” describes how Multicast Listener
Discovery (MLD) is used with IPv6 to support host users requests for multicast
data for a multicast group.
 Chapter 27, “Border Gateway Protocol,” describes Border Gateway Protocol
(BGP) concepts and features supported in Lenovo ENOS.
 Chapter 28, “OSPF,” describes key Open Shortest Path First (OSPF) concepts
and their implemented in Lenovo ENOS, and provides examples of how to
configure your switch for OSPF support.
 Chapter 29, “Protocol Independent Multicast ,” describes how multicast routing
can be efficiently accomplished using the Protocol Independent Multicast (PIM)
feature.
Part 6: High Availability Fundamentals
 Chapter 30, “Basic Redundancy,” describes how the NE2552E supports
redundancy through aggregation and Hotlinks.
 Chapter 31, “Layer 2 Failover,” describes how the NE2552E supports
high ‐ availability network topologies using Layer 2 Failover.
 Chapter 32, “Virtual Router Redundancy Protocol,” describes how the NE2552E
supports high ‐ availability network topologies using Virtual Router Redundancy
Protocol (VRRP).
Part 7: Network Management
 Chapter 33, “Link Layer Discovery Protocol,” describes how Link Layer
Discovery Protocol helps neighboring network devices learn about each others’
ports and capabilities.
 Chapter 34, “Simple Network Management Protocol ,” describes how to
configure the switch for management through an SNMP client.
 Chapter 35, “Service Location Protocol,” describes the Service Location Protocol
(SLP) that allows the switch to provide dynamic directory services.
 Chapter 36, “NETCONF,” describes how to manage the G8264 using the
Network Configuration Protocol (NETCONF), a mechanism based on the
Extensible Markup Language (XML).