Lenovo ThinkSystem D3284 страница 39 Скачать руководство пользователя

Страница: 39 / 159

Power cooling module – 2U enclosures

AC-DC power is provided by up to two auto-ranging Power Cooling Modules (PCMs) with integrated axial

cooling fans. The IOMs control fan speed. Also see

“System airflow” (page 40)

for optimal cooling within the

enclosure(s).

580W PCM

The 580W PCM voltage operating range is nominally 100V–240V AC, and operates at 50–60 Hz input frequency. The

isometric rear orientation in

Figure 33

shows the PCM aligned for insertion into the right-hand PCM slot located on the

enclosure rear panel.

Figure 33 LEDs: 580W PCM – 2U enclosure rear panel

For a full frontal view of a PCM panel located on the enclosure rear-panel, see

Figure 22 (page 30)

Multiple PCMs

The 2U storage system includes two PCMs which provide redundant power control for the system so that if one

PCM fails, the other maintains the power supply, and enclosure operation is not affected while you replace the

faulty module.

580W Power Cooling Module LED descriptions

(see inset illustration detail above)

PCM OK LED (Green)

Fan Fail LED (Amber/blinking amber)

AC Input Fail LED (Amber/blinking amber)

DC Fail LED (Amber/blinking amber)

LED behavior
•

If any of the PCM LEDs are illuminated amber, a module fault condition or failure has occurred.

•

For a detailed description of PCM LED behavior, see

“580W PCM LEDs” (page 96)

PCM LEDs Inset

As shown on PCM in left-hand slot

PCM oriented for use in right-hand slot

Содержание ThinkSystem D3284
































































































































































Результаты поиска

Содержание ThinkSystem D3284

Отзывы:

Похожие инструкции для ThinkSystem D3284

Бренды по названию

Популярные бренды

Lenovo ThinkSystem D3284, Руководство по установке и обслуживанию оборудования

Результаты поиска

Содержание ThinkSystem D3284

Отзывы:

Похожие инструкции для ThinkSystem D3284

Бренды по названию

Популярные бренды