Lenovo ThinkSystem 1754-A1T Скачать руководство пользователя страница 62

Страница: 62 / 88

Chapter 4 Using the On-Screen Display Interface

Resetting to Factory Defaults

You can clear current system settings and have all settings return to factory defaults. The

following settings will be reset:

•

All settings on the SETUP page.

•

All user accounts on the User Configuration page.

Restoring factory defaults does NOT require the administrator permission.

Exception:

Channel names are stored on the connected 1754-A1T KVM cables so they are

NOT reset to factory defaults.

Resetting system settings

1. Log out to show the Login screen. See

Logout

page 1

2. Press Ctrl + Shift + F10. The following message appears.

3. Press Enter to proceed with the factory reset. The following message appears.



Press Esc in order to cancel out of this selection.

4. Wait until the Login screen re-appears, indicating the reset is completed.

More Channel Information

Active and inactive channels are determined with the power status of the connected

ThinkSystem USB conversion cables for Analog KVM cable.

The default colour of an active channel is green.

Active and Inactive Channels

An active channel shows its channel name, while an inactive channel does not show any

channel name.

Active channels

The 1754-A1T KVM switch recognizes a channel as being active when it detects that the

channel port is connected to a "powered" ThinkSystem USB conversion cables for Analog KVM

cable.

Содержание ThinkSystem 1754-A1T

























































































Результаты поиска

Содержание ThinkSystem 1754-A1T

Отзывы:

Похожие инструкции для ThinkSystem 1754-A1T

Бренды по названию

Популярные бренды

Lenovo ThinkSystem 1754-A1T, Руководство пользователя

Результаты поиска

Содержание ThinkSystem 1754-A1T

Отзывы:

Похожие инструкции для ThinkSystem 1754-A1T

Бренды по названию

Популярные бренды