Lenovo ThinkStation P520 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 174

Lenovo ThinkStation P520 Скачать руководство пользователя страница 52

5. To save settings and exit the Setup Utility program, press F10 or Fn+F10 (depending on the keyboard

settings). Then, select

Yes

in the window displayed, and press Enter.

Selecting a temporary startup device

Note:

Not all discs and storage drives are bootable.

To select a temporary startup device, do the following:

1. Depending on the type of the storage device, do one of the following:

• If the storage device is internal, go to step 2.

• If the storage device is a disc, ensure that your computer is turned on. Then, insert the disc into the

optical drive.

• If the storage device is an external device other than a disc, connect the storage device to the

computer.

2. Turn on or restart the computer. Before Windows starts up, repeatedly press and release F12 or Fn+F12

(depending on the keyboard settings) until Startup Device Menu is displayed.

3. Select the desired storage device and press Enter. The computer then starts up from the device you

select.

If you want to select a permanent startup device, select

Enter Setup

on Startup Device Menu and press

Enter to start the Setup Utility program. For more information about how to select a permanent startup
device, see “Changing the startup device sequence permanently” on page 39.

Changing the fan speed level

The Fan Control Stepping item enables you to adjust the thermal performance of your computer. From level 1
to level 7, a higher fan speed level indicates better thermal performance with more noise.

To change the fan speed level, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 35.

2. Select

Power

➙

Fan Control Stepping

and press Enter.

3. Select a fan speed level and press Enter.

4. To save settings and exit the Setup Utility program, press F10 or Fn+F10 (depending on the keyboard

settings), select

Yes

in the window displayed, and press Enter.

Exiting the Setup Utility program

To exit the Setup Utility program, do one of the following:

• If you want to save the new settings, press F10 or Fn+F10 (depending on the keyboard settings). Then,

select

Yes

in the window displayed and press Enter.

• If you do not want to save the new settings, select

Exit

➙

Discard Changes and Exit

and press Enter.

Then, select

Yes

in the window displayed and press Enter.

Updating and recovering the BIOS

The BIOS is the first program that the computer runs when you turn on the computer. The BIOS initializes the
hardware components and loads the operating system and other programs.

40

P520 User Guide

«
...
50
51
52
53
54
...
»

Содержание ThinkStation P520















































































































































































Отзывы:

Нет отзывов