Lenovo ThinkStation P520 Скачать руководство пользователя страница 149

Страница: 149 / 174

Chapter 8. Getting information, help, and service

This chapter provides information about getting help and support from Lenovo.

Information resources

You can use the information in this section to access useful resources relating to your computing needs.

Accessing the user guide in various languages

To access the user guide in various languages, go to:

https://support.lenovo.com

Windows help system

The Windows help system provides you with detailed information about using the Windows operating
system.

Note:

Using the help for Windows 10 requires an active Internet connection.

To access the Windows help system, do the following:

1. Click the Start button to open the Start menu.

2. Click

Get Help

Safety and warranty

The

Safety, Warranty, and Setup Guide

provided with your computer contains important safety information,

product warranty terms, initial setup procedure, and legal notices. Ensure that you read and understand all
safety information in the

Safety, Warranty, and Setup Guide

before using your computer.

In addition, read and understand “Read this first: Important safety information” on page iii before using your
computer. This preface provides additional safety information that applies to topics and tasks described in
this

User Guide

Lenovo Web site

The Lenovo Web site (

https://www.lenovo.com

) provides up-to-date information and services to help you buy,

upgrade, and maintain your computer. You also can do the following:

• Shop for desktop and notebook computers, monitors, projectors, upgrades, and accessories for your

computer, and special offers.

• Purchase additional services, such as support for hardware, operating systems, programs, network setup

and configuration, and custom installations.

• Purchase upgrades and extended hardware repair services.

• Access troubleshooting and support information for your computer model and other supported products.

• Find a Service Provider located near you.

Lenovo Support Web site

Technical support information is available on the Lenovo Support Web site at:

https://support.lenovo.com

137

Содержание ThinkStation P520















































































































































































Результаты поиска

Содержание ThinkStation P520

Отзывы:

Lenovo ThinkStation P520, Руководство пользователя, Страница: 149 / 174

Результаты поиска

Содержание ThinkStation P520

Отзывы: