Lenovo ThinkStation P500 Скачать руководство пользователя страница 184

Страница: 184 / 232

7. Align the plastic tab

on the flex adapter with the corresponding slot in the front fan assembly, and

install the new flex adapter into the flex adapter slot.

Note:

Ensure that you install the flex adapter only into a flex adapter slot. Do not install the flex adapter

into a PCI or PCI Express card slot.

Figure 119. Installing the flex adapter

8. Pivot the tab on the front fan assembly to close the latch inside. Ensure that the new flex adapter

is secured in position.

9. If the new flex adapter only works with a cable connected to it, connect the cable to the new flex adapter.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 198.

Replacing the battery

Attention:

Do not open your computer or attempt any repair before reading and understanding the Chapter

1 “Read this first: Important safety information” on page 1.

Your computer has a special type of memory that maintains the date, time, and settings for built-in features,
such as parallel-connector assignments (configuration). A battery keeps this information active when you
turn off the computer.

178

ThinkStation P500 and P700 Hardware Maintenance Manual

Содержание ThinkStation P500









































































































































































































































Результаты поиска

Содержание ThinkStation P500

Отзывы:

Lenovo ThinkStation P500, Руководство по техническому обслуживанию аппаратной части, Страница: 184 / 232

Результаты поиска

Содержание ThinkStation P500

Отзывы: