Lenovo ThinkStation P500, Руководство по техническому обслуживанию аппаратной части, Страница: 166 / 232

5. Insert the new power supply assembly with the handle open into the chassis. Then, pivot the handle as
shown to fully install the new power supply assembly into position.
Note: You might need to push hard to close the handle if you feel resistance when you pivot the handle
to the closed position.
Figure 94. Installing the power supply assembly
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 198.
Installing or replacing a PCI card
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 “Read this first: Important safety information” on page 1.
Depending on your computer model, your computer comes with one of the following combinations:
• ThinkStation P500: One standard PCI card slot, one PCI Express x1 card slot, two PCI Express x4 card
slots, and two PCI Express x16 graphics card slots.
• ThinkStation P700: One standard PCI card slot, one PCI Express x4 card slot, one PCI Express x8 card
slot, and three PCI Express x16 graphics card slots.
Install PCI Express cards according to the corresponding slot types and the following illustrated installation
order:
• For ThinkStation P500:
160
ThinkStation P500 and P700 Hardware Maintenance Manual