Lenovo ThinkStation P410 Скачать руководство пользователя страница 90

Страница: 90 / 208

– To turn some Windows features off, click

Turn Windows features on or off

. Follow the

instructions on the screen.

– To remove some unnecessary programs, select the program you want to remove, and then click

Uninstall/Change

Uninstall

The free memory space is insufficient.

Solutions:

• Right-click a blank area on the taskbar and open Task Manager. Then, end some tasks you are not

performing.

• Install additional memory modules. Refer to “Installing or replacing hardware” on page 96. To purchase

memory modules, go to:
http://www.lenovo.com

Serial connector problem

The serial connector cannot be accessed.

Solutions:

• Connect the serial cable from the serial connector on the computer to the serial device. If the serial device

has its own power cord, connect the power cord to a grounded electrical outlet.

• Turn on the serial device and keep the device online.

• Install any programs supplied with the serial device. Refer to the documentation that comes with the

serial device for more information.

• If you added one serial-connector adapter, ensure that the adapter is installed correctly.

USB device problems

A USB device cannot be accessed.

Solutions:

• Connect the USB cable from the USB connector to the USB device. If the USB device has its own power

cord, connect the power cord to a grounded electrical outlet.

• Turn on the USB device and keep the device online.

• Install any device drivers or programs supplied with the USB device. Refer to the documentation that

comes with the USB device for more information.

• Disconnect and reconnect the USB connector to reset the USB device.

The Windows 7 operating system cannot be installed from an external optical drive or an external
USB device.

Solution:

Go to https://support.lenovo.com/us/en/documents/ht104142 for more information.

Software and driver problems

For some programs, dates cannot be sorted in correct order.

Solution:

ThinkStation P410 Hardware Maintenance Manual

Содержание ThinkStation P410

















































































































































































































Результаты поиска

Содержание ThinkStation P410

Отзывы:

Lenovo ThinkStation P410, Руководство по техническому обслуживанию аппаратной части, Страница: 90 / 208

Результаты поиска

Содержание ThinkStation P410

Отзывы: