Lenovo ThinkServer TS460, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 75 / 172

The following illustration shows the installation order for the four memory slots. Install memory modules in
the numerical order as shown.
Figure 24. Memory module installation order
Removing a memory module
To remove a memory module, do the following:
1. Prepare your server and remove the server cover. See “Preparing your server in advance and removing
the server cover” on page 57.
2. Lay the server on its side for easier operation.
3. Locate and remove the memory module.
xxx xxxx xxx-xxxxx-x-x-xx-xx
xxxxxxxxxxxxx-xx xx xx xxxx
Figure 25. Removing a memory module
4. If you are instructed to return the old memory module, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
Installing a memory module
Note: Ensure that you follow the memory module installation rules when performing the operation. See
“Memory module installation rules” on page 60.
To install a memory module, do the following:
Chapter 5
.
Replacing hardware
61