manualshive.com logo in svg

Lenovo ThinkServer RD650, Руководство пользователя

Lenovo ThinkServer RD650 - надежный сервер для бизнеса. Пользователи могут скачать бесплатное руководство по эксплуатации (User Manual) с официального сайта. RD650 обеспечивает высокую производительность и надежность, идеально подходит для компаний любого масштаба. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

LSI Corporation

- 261 -

12Gb/s MegaRAID SAS Software User Guide

March 2014

Chapter 9: Configuration 

Creating a New Configuration

Chapter 9: Configuration

This chapter explains how to use MegaRAID Storage Manager software to create and modify storage configurations 
on LSI SAS controllers.

The LSI SAS controllers support RAID 0, RAID 1, RAID 5, RAID 6, RAID 00, RAID 10, RAID 50, and RAID 60 storage 
configurations. The 

Configuration

 wizard allows you to easily create new storage configurations and modify the 

configurations. To learn more about RAID and RAID levels, see 

Introduction to RAID

.

NOTE

You cannot create or modify a storage configuration unless you are 
logged on to a server with administrator privileges.

9.1

Creating a New Configuration

You can use the MegaRAID Storage Manager software to create new storage configurations on systems with LSISAS 
controllers. You can create the following types of configurations:

Simple configuration

 specifies a limited number of settings and has the system select drives for you. This option 

is the easiest way to create a virtual drive.

Advanced configuration

 lets you choose additional settings and customize virtual drive creation. This option 

provides greater flexibility when creating virtual drives for your specific requirements.

This section describes the virtual drive parameters and explains how to create simple and advanced storage 
configurations.

9.1.1

Selecting Virtual Drive Settings

This section describes the virtual drive settings that you can select when you use the advanced configuration 
procedure to create virtual drives. You should change these parameters only if you have a specific reason for doing so. 
It is usually best to leave them at their default settings.

Initialization state:

 Initialization prepares the storage medium for use. Specify the initialization status:

—

No Initialization

: (the default) The new configuration is not initialized, and the existing data on the drives is 

not overwritten.

—

Fast Initialization

: The firmware quickly writes 0s to the first and last 8-MB regions of the new virtual drive 

and then completes the initialization in the background. This allows you to start writing data to the virtual 
drive immediately.

—

Full Initialization

: A complete initialization is done on the new configuration. You cannot write data to the 

new virtual drive until the initialization is complete. This process can take a long time if the drives are large.

NOTE

BGI is supported only for RAID 5 and RAID 6 and not for any other RAID 
levels. New RAID 5 virtual drives require at least five drives for a 
background initialization to start. New RAID 6 virtual drives require at 
least seven drives for a background initialization to start. If there are 
fewer drives, the background initialization does not start.

Strip size:

 Strip sizes of 8 KB, 16 KB, 32 KB, 64 KB, 128 KB, 256 KB, 512 KB, and 1024 KB are supported. The default 

is 64 KB. For more information, see the 

striping

 entry in the 

Glossary

.

Read policy:

 Specify the read policy for this virtual drive:

—

Always read ahead

: Read ahead capability allows the controller to read sequentially ahead of requested 

data and to store the additional data in cache memory, anticipating that the data will be needed soon. This 
process speeds up reads for sequential data, but little improvement occurs when accessing random data.

Содержание ThinkServer RD650



































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkServer RD650

NOMACHINE D-811_002-NXS-SAG Administrator'S Manual preview
D-811_002-NXS-SAG
Бренд: NOMACHINE Страницы: 19
IBM eserver xSeries 440 Quick Reference preview
eserver xSeries 440
Бренд: IBM Страницы: 34
Supermicro SUPERSERVER 6034H-X8R User Manual preview
SUPERSERVER 6034H-X8R
Бренд: Supermicro Страницы: 128
Gigabyte R283-S93-AAF1 User Manual preview
R283-S93-AAF1
Бренд: Gigabyte Страницы: 115
dallmeier SMAVIA DMS 2400 II Manual preview
SMAVIA DMS 2400 II
Бренд: dallmeier Страницы: 36
xFusion Digital Technologies FusionServer XH321 V5 Manual preview
FusionServer XH321 V5
Бренд: xFusion Digital Technologies Страницы: 76
disguise rx Hardware Manual preview
rx
Бренд: disguise Страницы: 12
Bosanova RBT-402 Specifications preview
RBT-402
Бренд: Bosanova Страницы: 2
Viavi G4-Apex-ENT-80T Manual preview
G4-Apex-ENT-80T
Бренд: Viavi Страницы: 11
Axis AXIS 560 User Manual preview
AXIS 560
Бренд: Axis Страницы: 172
innuos Sonos ZEN Quick Start Manual preview
Sonos ZEN
Бренд: innuos Страницы: 10
Terra PCS200 User Manual preview
PCS200
Бренд: Terra Страницы: 22
innuos ZEN MINI Service Manual preview
ZEN MINI
Бренд: innuos Страницы: 11
Silicon Graphics IS2224 Setup Manual preview
IS2224
Бренд: Silicon Graphics Страницы: 72
Lantronix DSTni-XPress DR Quick Start preview
DSTni-XPress DR
Бренд: Lantronix Страницы: 2
Dell EMC XC Core XC6515 Installation And Service Manual preview
XC Core XC6515
Бренд: Dell EMC Страницы: 159
Tiger Technology Serve 1U Assembly Manual preview
Serve 1U
Бренд: Tiger Technology Страницы: 22
Intel SE7520BD2 Technical Product Specification preview
SE7520BD2
Бренд: Intel Страницы: 179

Бренды по названию

Популярные бренды

Загрузить еще бренды