Lenovo ThinkServer RD650 Скачать руководство пользователя страница 122

Страница: 122 / 418

LSI Corporation

- 122 -

12Gb/s MegaRAID SAS Software User Guide



March 2014

Chapter 5: The HII Configuration Utility

Managing Controllers

Figure 86 Save TTY Log

Follow these steps to save the TTY log entries to a file.

To select a different file system from the one listed in the

File Systems

field, highlight the current file system

name, and press

Enter

An error message appears if there is no file system.

Select a file system from the popup menu, and press

Enter

Highlight

Select File System

and press Enter.

To save the TTY log events file to a different directory from the one listed in the

Directories

field, highlight the

current directory name, and press

Enter

Select a directory name from the pop-up menu, and press

Enter

Highlight

Select Directory

, and press

Enter

To enter a different name for the TTY log file, highlight the current file name, and press

Enter

Type the new file name in the pop-up window, and press

Enter

To select how many TTY log entries to save, highlight the

Entries to Save

field, and press

Enter

10. Select an option from the popup menu, and press

Enter

Your choices are

2 KB

4 KB

8 KB

16 KB

, or

All

11. Highlight

Save Log

, and press

Enter

to save the log entries to the file.

5.4.9

Managing and Changing Link Speeds

The Manage Link Speed feature lets you change the link speed between the controller and an expander or between
the controller and a drive that is directly connected to the controller. The following dialog appears when you select

Manage Link Speed

on the

Advanced Controller Management

dialog. The default settings for all phys is

Auto

Содержание ThinkServer RD650



































































































































































































































































































































































































































Результаты поиска

Содержание ThinkServer RD650

Отзывы:

Lenovo ThinkServer RD650, Руководство пользователя, Страница: 122 / 418

Результаты поиска

Содержание ThinkServer RD650

Отзывы: