Lenovo ThinkPad Yoga 11e, Руководство пользователя, Страница: 49 / 164

The computer display requires considerable battery power. To turn off the power to the display and make
the computer enter screen-blank mode, right-click the battery gauge icon in the Windows notification
area and then select
Power off display .
• Sleep mode
In sleep mode, your work is saved to memory, and then the hard disk drive or solid-state drive and
the computer display are turned off. When your computer resumes to normal operation, your work is
restored within seconds.
To put your computer into sleep mode, do the following:
– For Windows 7 : Open the Start menu, then click the arrow next to the Shut down button. Click
Sleep from the menu displayed.
– For Windows 8.1 : Go to the Start screen by pressing the Windows key , click the power icon
, then click Sleep .
– For Windows 10: Open the Start menu, click Power , and then click Sleep .
• Hibernation mode
By using this mode, you can turn off your computer completely without saving files or exiting from any
programs that are running. When the computer enters hibernation mode, all open programs, folders, and
files are saved to the hard disk drive or solid-state drive, and then the computer turns off.
To put the computer into hibernation mode, change your power plan settings by doing the following:
– For Windows 7 : Open the Start menu, then click the arrow next to the Shut down button. Click
Hibernate from the menu displayed.
– For Windows 8.1 and Windows 10 : Define what the power button does first, then press the power
button to put the computer into hibernation mode. For more information, see “Front view” on page 1.
If you put your computer into hibernation mode with the wake-up function disabled, the computer does
not consume any power. The wake-up function is disabled by default. If you put your computer into
hibernation mode with the wake-up function enabled, the computer consumes a small amount of power.
To enable the wake-up function, do the following:
1. Go to Control Panel and click System and Security
➙
Administrative Tools .
2. Double-click Task Scheduler . If you are prompted for an administrator password or confirmation,
type the password or provide confirmation.
3. From the left pane, select the task folder for which you want to enable the wake-up function. The
scheduled tasks are displayed.
4. Click a scheduled task, and then click the Conditions tab.
5. In the Power area, select Wake the computer to run this task .
• Wireless off
When you are not using the wireless features, such as Bluetooth or wireless-LAN, turn them off. This
helps conserve power. To turn off the wireless features, press the wireless-radios control key .
Maximizing the battery life
To maximize the life of the battery, do the following:
• Use the battery until the charge is completely depleted.
• Recharge the battery completely before using it. You can see whether the battery is fully charged from the
battery-status icon in the Windows notification area.
• Take consideration of using power-saving modes, such as sleep mode and hibernation mode.
Chapter 2
.
Using your computer
33