Lenovo ThinkPad X13 Gen 2, Руководство по техническому обслуживанию аппаратной части, Страница: 92 / 126

1190 System board
Important notices for handling the system board:
When handling the system board, read the following:
• The system board has an accelerometer, which can be broken when several thousands of G-forces are applied.
Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject
the accelerometer to as much as 6000 G's of shock.
• Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or
composite.
• Avoid rough handling of any kind.
• At every point in the process, be sure not to drop or stack the system board.
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated
conductive surface.
For access, remove these FRUs in order:
• “Removing the nano-SIM-card and nano-SIM-card tray” on page 66
• “1010 Keyboard (for ThinkPad X13 Gen 2 only)” on page 66
• “1020 Base cover assembly” on page 68
• “1030 M.2 solid-state drive, bracket, and thermal pad” on page 70
• “1040 Wireless WAN card (for selected models)” on page 72
• “1050 Wireless LAN card (for selected AMD models)” on page 73
• “1060 Built-in battery” on page 74
• “1070 Docking-station-connector bracket” on page 75
• “1080 Thermal fan assembly” on page 76
This computer shares a common system board with another computer. After replacing the system board,
you will be prompted to input a brand name to correctly identify the machine type. The following table
contains the brand name required to complete this step.
Note: Input the exact brand name as shown in this table.
ThinkPad T14s Gen 2 Machine types (MT): 20WM, 20WN, 20XF, and 20XG
ThinkPad X13 Gen 2 Machine types (MT): 20WK, 20WL, 20XH, and 20XJ
86
T14s Gen 2 and X13 Gen 2 Hardware Maintenance Manual