Lenovo ThinkPad X13 Gen 2 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 126

Lenovo ThinkPad X13 Gen 2 Скачать руководство пользователя страница 40

7. Reinstall the built-in battery.

8. Reinstall the base cover assembly.

9. Reconnect ac power.

10. Turn on the computer and wait until the POST ends. After the POST ends, the password prompt does

not appear. The system management password has been removed.

If a supervisor password has been set and is known to the service technician, do the following to remove the
system management password:

1. Turn on the computer.

2. When the ThinkPad logo is displayed, immediately press F1.

3. Type the supervisor password to enter the ThinkPad Setup program.

4. Select

Security

.

5. Select

Password

.

6. Select

System Management Password

.

7. Type the current supervisor password in the

Enter Current Password

field. Then leave the

Enter New

Password

field blank, and press Enter twice.

8. In the Changes have been saved window, press Enter.

9. Press F10 to save changes and exit the ThinkPad Setup program. The system management password

has been removed.

Power management

To reduce power consumption, the computer has two power management modes: sleep and hibernation.

Sleep mode

When the computer enters sleep mode, the following events occur:
•  The LCD is powered off.
•  The solid-state drive is powered off.
•  The microprocessor stops.

To put your computer into sleep mode, open the Start menu, click

Power

, and then click

Sleep

.

In certain circumstances, the computer goes into sleep mode automatically:

• After a period of inactivity specified in power plan settings

• When the battery power is low

To cause the computer to return from sleep mode and resume operation, do one of the following:
•  Press any key.
•  Open the LCD cover.
•  Turn on the power button.

Also, in either of the following events, the computer automatically returns from sleep mode and resumes
operation:

• The ring indicator (RI) is signaled by a serial device or a PC Card device.

• The time set on the resume timer elapses.

Note:

The computer does not accept any input immediately after it enters sleep mode. Wait a few

seconds before taking any action to reenter operation mode.

34

T14s Gen 2 and X13 Gen 2 Hardware Maintenance Manual

«
...
38
39
40
41
42
...
»

Содержание ThinkPad X13 Gen 2































































































































Отзывы:

Нет отзывов