Lenovo ThinkPad X1 2nd Generation, Руководство пользователя, Страница: 63 / 134

Enabling or disabling the internal Bluetooth device
Enabling or disabling the internal wireless WAN device
Enabling or disabling the Security mode
Enabling or disabling the ngerprint reader priority
Erasing the ngerprint data
Notes:
The system administrator can set the same supervisor password on many ThinkPad notebook computers
to make administration easier.
By enabling the Lock UEFI BIOS Settings feature on the
Password
menu when you set the supervisor
password, you make it impossible for anyone but you to make changes.
Setting, changing, or removing a supervisor password
Only a system administrator can set, change, or remove a supervisor password.
To set, change, or remove a supervisor password, do the following:
1. Print these instructions.
2. Save all open les, and exit all applications.
3. Turn your computer off and then turn it on again.
4. When the logo screen is displayed, press F1. The ThinkPad Setup program main menu opens.
5. Select
Security
, using the cursor directional keys to move down the menu.
6. Select
Password
.
7. Select
Supervisor Password
.
8. A window opens, prompting you to enter a new password. Depending on your needs, do one of the
following:
To set a password, do the following:
a. In the
Enter New Password
eld, type a desired password and press Enter.
b. In the
Con rm New Password
eld, retype the password and press Enter.
To change a password, do the following:
a. In the
Enter Current Password
eld, type the current supervisor password and press Enter.
b. In the
Enter New Password
eld, type the new supervisor password; then retype the password
you just entered to verify it in the
Con rm New Password
eld. Press Enter.
To remove a password, do the following:
a. In the
Enter Current Password
eld, type the current supervisor password and press Enter.
b. Leave the
Enter New Password
and
Con rm New Password
elds blank. Press Enter.
Attention:
You might want to note down your password and keep it in a safe place. If you forget your
supervisor password, Lenovo cannot reset your password. You must take your computer to a Lenovo
reseller or a Lenovo marketing representative to have the system board replaced. Proof of purchase is
required, and a fee will be charged for parts and service.
9. In the Setup Notice window that is displayed, press Enter to continue.
10. Press F10. The Setup Con rmation window opens. Select
Yes
to save con guration changes and exit.
The next time you open the ThinkPad Setup program, you will be prompted to type your password to proceed.
Chapter 4
.
Security 49