Lenovo ThinkPad S5 2nd Generation, Руководство по техническому обслуживанию аппаратной части

Страница: 79 / 110

3. Remove the built-in battery, see “1020 Battery” on page 65.
4. Remove the hard disk drive assembly, solid-state drive assembly, hard disk drive cable, or solid-state
drive cable, see “1030 Hard disk drive assembly, solid-state drive assembly, hard disk drive cable, or
solid-state drive cable” on page 65.
5. Remove the keyboard, see “1050 Keyboard” on page 68.
6. Remove the base cover assembly, see “1060 Base cover assembly” on page 70.
7. Open the latches on both sides of the memory slot at the same time
1 and then remove the memory
module
2
.
When installing:
Insert the notched end of the memory module into the slot at an angle of about 20 degrees. Press the
memory module firmly, and pivot it downwards until it snaps into place. Ensure that the memory module is
firmly installed in the slot and does not move easily.
1080 Wireless LAN card
For access, remove these FRUs in order:
• “1010 Bottom cover” on page 64
• “1020 Battery” on page 65
• “1030 Hard disk drive assembly, solid-state drive assembly, hard disk drive cable, or solid-state drive
cable” on page 65
• “1050 Keyboard” on page 68
• “1060 Base cover assembly” on page 70
• “1070 Memory module” on page 71
Chapter 9
.
Removing or replacing a FRU
73