Lenovo ThinkCentre M920s страница 11 Скачать руководство пользователя

Страница: 11 / 80

Chapter 2. Specifications

Power supply

• 180 watt automatic voltage-sensing power supply

• 250 watt automatic voltage-sensing power supply

• 400 watt automatic voltage-sensing power supply

Storage drives

Up to four SATA storage drives (including one hot-swap storage drive) and one M.2 storage drive

Video features

• The integrated graphics card supports the following:

– DisplayPort-out connector

– VGA-out connector

• The optional discrete graphics card provides an enhanced video experience and extended capabilities.

Audio features

• The integrated audio card supports the following:

– Audio line-out connector

– Headset connector

– Internal speaker

– Microphone connector

• The optional discrete audio card provides an enhanced audio experience and extended capabilities.

Input/Output (I/O) features

• Audio connectors (audio line-out connector, headset connector, and microphone connector)

• Card reader slot (optional)

• Display connectors (DisplayPort-out connector and VGA-out connector)

• Ethernet connector

• PS/2 keyboard connector (optional)

• PS/2 mouse connector (optional)

• Serial connector

• USB connectors

Expansion

• Card reader (optional)

• Memory slot

• Optical drive (optional)

• PCI Express card slot (physical link width x16; negotiable link width x4, x1)

• PCI Express x1 card slot

• PCI Express x16 graphics card slot

• Storage drive bay

Содержание ThinkCentre M920s

















































































Результаты поиска

Содержание ThinkCentre M920s

Отзывы:

Похожие инструкции для ThinkCentre M920s

Бренды по названию

Популярные бренды

Lenovo ThinkCentre M920s, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Результаты поиска

Содержание ThinkCentre M920s

Отзывы:

Похожие инструкции для ThinkCentre M920s

Бренды по названию

Популярные бренды