Lenovo ThinkAgile MX3321-F, Руководство пользователя

Страница: 69 / 126

Figure 41. Riser card removal
If you are instructed to return the old riser card, follow all packaging instructions and use any packaging
materials that are provided.
Install a riser card
Use this information to install a riser card.
Chapter 4 “ Read
the
installation
Guidelines” on
page 29
“ Power off
the server
for this task”
on page 34
“ ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 31
Before installing a riser card, touch the static-protective package that contains the new riser card to any
unpainted surface on the outside of the server. Then, take the new riser card out of the package and place it
on a static-protective surface.
To install a riser card, complete the following steps:
Note: The riser assembly you want to install might be different from the illustrations below, but the
installation method is the same.
Step 1. Note the notch 1 on the riser card and ensure that the orientation of the riser card is correct as
shown. Then, align the screw holes in the new riser card with the corresponding ones in the bracket
and install the two screws to secure the riser card to the bracket.
Chapter 5
.
Hardware replacement procedures
65