Lenovo Storage N3310 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 152

Lenovo Storage N3310 Скачать руководство пользователя страница 32

1

Power supply 1

2

Power supply 2 (available on some models)

The hot-swap redundant power supplies help you avoid significant interruption to the operation of the
system when a power supply fails. You can purchase a power supply option from Lenovo and install the
power supply to provide power redundancy without turning off the storage product.

On each power supply, there are three status LEDs near the power cord connector. For information about
the status LEDs, see “Power supply status LEDs” on page 28.

3

PCIe slot 2

It is recommended that you attach a RAID card to the low-profile PCIe slot.

Physical link width

Negotiable link width

Supported card length and height

x16

x16, x8, x4, x2, x1

Low-profile card

4

PCIe slot 1

Used to attach an Ethernet card or any other supported PCIe card.

Physical link width

Negotiable link width

Supported card length and height

x16

x16, x8, x4, x2, x1

Half-length, full-height card

5

System ID LED

When you press the ID button on the front panel, the ID LEDs on both the front and rear of the storage
product are lit to help you locate the storage product among other storage products. You also can turn on
the ID LEDs using a remote management program for storage product presence detection.

Status

Color

Description

On

Blue

The system is identified.

Off

None

The ID LED is not in use or the system is not
identified.

6

USB 3.0 connectors (2)

Used to attach a USB-compatible device, such as a USB keyboard, mouse, scanner, or printer. If you have
more than four USB devices, you can purchase a USB hub, which you can use to connect additional
USB devices.

7 8 10

Ethernet connectors (RJ-45)

Used to attach an Ethernet cable for a LAN. Each Ethernet connector has two status LEDs to help you
identify the Ethernet connectivity, activity, and connection speed.

Note:

Ethernet connector 0 (callout

10

) marked with “MGMT” is for system management by default.

18

Lenovo Storage N3310 User Guide and Hardware Maintenance Manual

«
...
30
31
32
33
34
...
»

Содержание Storage N3310

























































































































































Отзывы:

Нет отзывов