Lenovo Storage N3310, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 107 / 152

• To complete the installation, go to “Completing the parts replacement” on page 112.
Replacing a 2.5-inch solid-state drive from a 3.5-inch hard-disk-drive bay
Attention: Do not open your storage product or attempt any repair before reading and understanding “Safety
information” on page iii and “Guidelines” on page 41.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
To replace a 2.5-inch solid-state drive from a 3.5-inch hard-disk-drive bay, do the following:
1. Locate the appropriate hard-disk-drive bay. See “Front view of the storage product” on page 14.
2. Press the release button 1 to open the handle of the 3.5-inch drive bracket.
Figure 70. Opening the handle of the 3.5-inch drive bracket
3. Pull the handle and carefully slide the bracket with the solid-state drive out of the front of the chassis.
Figure 71. Removing the bracket with the solid-state drive
Chapter 6
.
Replacing hardware
93