Lenovo RackSwitch G8332, Справочник по командам

Страница: 669 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
669
Service Location Protocol Configuration
Service Location Protocol (SLP) enables networked devices to request/announce
services over a local area network without prior configuration. In an SLP
environment, devices may have the following roles:
 User Agents (UA) are devices requesting services.
 Service Agents (SA) are devices providing services.
 Directory Agents (DA) are devices caching services provided by SAs. When
present in an SLA setup, DAs mediate all communication between UAs and
SAs.
When SLP is enabled, the RackSwitch G8332 behaves as a Service Agent providing
systems management services.
Table 382.
Service Location Protocol Options
Command Syntax and Usage
[no] ip slp active ­ da ­ discovery enable
Enables or disables active directory agent discovery.
The default value is
disabled
.
Command mode : Global configuration
ip slp active ­ da ­ discovery ­ start ­ wait ­ time
<1 ‐ 10>
Number of seconds to wait after enabling SLP before attempting active DA
discovery, if active DA discovery is enabled.
The default value is
3
seconds.
Command mode : Global configuration
[no] ip slp enable
Enables or disables SLP.
The default value is
disabled
.
Command mode : Global configuration
clear ip slp directory ­ agents
Clears directory agents discovered.
Command mode : Privileged EXEC
show ip slp directory ­ agents
Displays DA information.
Command mode : All
show ip slp information
Displays SLP information.
Command mode : All
show ip slp user ­ agents
Displays UA information.
Command mode : All