Lenovo RackSwitch G8332, Справочник по командам

Страница: 587 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
587
IPsec Configuration
The following table describes the commands used to configure IPsec.
IPsec Transform Set Configuration
The following table describes the commands used to configure IPsec transforms.
Table 319.
IPsec Options
Command Syntax and Usage
[no] ipsec enable
Enables or disables IPsec.
Command mode: Global configuration
show ipsec
Displays the current IPsec settings.
Command mode: All
Table 320.
IPsec Transform Set Options
Command Syntax and Usage
ipsec transform ­ set
<1 ‐ 10>
{ah ­ sha1|esp ­ 3des|esp ­ aes ­ cbc|
|esp ­ null|esp ­ sha1}
Sets the AH or ESP authentication, encryption, or integrity algorithm. The
available algorithms are as follows:

ah ­ sha1

esp ­ 3des

esp ­ aes ­ cbc

esp ­ null

esp ­ sha1
Command mode: Global configuration
ipsec transform ­ set
<1 ‐ 10>
transport {ah ­ sha1|esp ­ 3des|
|esp ­ aes ­ cbc|esp ­ null|esp ­ sha1}
Sets transport mode and the AH or ESP authentication, encryption, or
integrity algorithm.
Command mode: Global configuration
ipsec transform ­ set
<1 ‐ 10>
tunnel {ah ­ sha1|esp ­ 3des|
|esp ­ aes ­ cbc|esp ­ null|esp ­ sha1}
Sets tunnel mode and the AH or ESP authentication, encryption, or integrity
algorithm.
Command mode: Global configuration