Lenovo NeXtScale n1200 Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 878

background image

• Go to the Lenovo support website at http://www.lenovo.com/support to check for technical information,

hints, tips, and new device drivers or to submit a request for information.

Table 15. ServerGuide problems and actions

Symptom

Action

The

ServerGuide Setup and

Installation

CD will not start.

1. Make sure that the server supports the ServerGuide program and has a

startable (bootable) DVD drive.

2. If the startup (boot) sequence settings have been changed, make sure that the

DVD drive is first in the startup sequence.

3. If more than one DVD drive is installed, make sure that only one drive is set as

the primary drive. Start the CD from the primary drive.

The operating-system
installation program
continuously loops.

Make more space available on the hard disk.

The ServerGuide program will
not start the operating-system
CD.

Make sure that the operating-system CD is supported by the ServerGuide program.
For a list of supported operating-system versions, go to http://www.ibm.com/
support/entry/portal/ docdisplay?lndocid=SERV-GUIDE, click the link for your
ServerGuide version, and scroll down to the list of supported Microsoft Windows
operating systems.

The operating system cannot
be installed; the option is not
available.

Make sure that the server supports the operating system. If it does, either no logical
drive is defined (SCSI RAID servers), or the ServerGuide System Partition is not
present. Run the ServerGuide program and make sure that setup is complete.

Software problems

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• If an action step is preceded by '(Trained technician only)', that step must be performed only by a Trained

technician.

• Go to the Lenovo support website at http://www.lenovo.com/support to check for technical information,

hints, tips, and new device drivers or to submit a request for information.

Table 16. Software problems and actions

Symptom

Action

You suspect a software
problem.

1. To determine whether the problem is caused by the software, make sure that:

• The server has the minimum memory that is needed to use the software. For

memory requirements, see the information that comes with the software. If
you have just installed an adapter or memory, the server might have a
memory-address conflict.

•  The software is designed to operate on the server.
•  Other software works on the server.
•  The software works on another server.

2. If you received any error messages when using the software, see the

information that comes with the software for a description of the messages and
suggested solutions to the problem.

3. Contact the software vendor.

78

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

«
...
90
91
92
93
94
...
»

Содержание NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NeXtScale n1200

Бренд: Eaton Страницы: 4

Бренд: RaidSonic Страницы: 2

Бренд: Conrad Страницы: 8

Бренд: Swarovski Optik Страницы: 2

Бренд: iStarUSA Страницы: 2

Бренд: Mitsubishi Electric Страницы: 22

Бренд: Thermaltake Страницы: 12

Бренд: Hard Head Страницы: 10

Бренд: IBM Страницы: 122

Бренд: HP Страницы: 44

Cray Cls 4U 106-10TB

Бренд: HP Страницы: 36

Бренд: HP Страницы: 25

Бренд: HP Страницы: 42

Бренд: HP Страницы: 150

Бренд: HP Страницы: 26

Бренд: HP Страницы: 36

Бренд: HP Страницы: 60

Бренд: HP Страницы: 47

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды