Lenovo NeXtScale n1200 Скачать руководство пользователя страница 88

Страница: 88 / 878

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained

technician.

• Go to the Lenovo support website at http://www.lenovo.com/support to check for technical information,

hints, tips, and new device drivers or to submit a request for information.

Symptom

Action

d. (Trained technician only) System board.

Network connection problems

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• If an action step is preceded by '(Trained technician only)', that step must be performed only by a Trained

technician.

• Go to the Lenovo support website at http://www.lenovo.com/support to check for technical information,

hints, tips, and new device drivers or to submit a request for information.

Table 11. Network connection problems and actions

Symptom

Action

1. Make sure the license key is valid.

2. Generate a new license key and log in again.

Optional-device problems

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• If an action step is preceded by '(Trained technician only)', that step must be performed only by a Trained

technician.

• Go to the Lenovo support website at http://www.lenovo.com/support to check for technical information,

hints, tips, and new device drivers or to submit a request for information.

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

Содержание NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NeXtScale n1200

Отзывы:

Lenovo NeXtScale n1200, Инструкция по установке и обслуживанию, Страница: 88 / 878

Результаты поиска

Содержание NeXtScale n1200

Отзывы: