Lenovo NeXtScale n1200 Скачать руководство пользователя страница 198 | Manualshive

Страница: 198 / 878

Lenovo NeXtScale n1200 Скачать руководство пользователя страница 198

Figure 108. Installation tool handle adjustment

d. Lift the microprocessor out of the socket.

Figure 109. Microprocessor removal

e. Place the microprocessor on a static-protective surface.

Attention:

The pins on the sockets are fragile. Any damage to the pins might require replacing

the system board.

If you are instructed to return the server component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.

Replacing a microprocessor

Use this information to replace a microprocessor.

The following notes describe the type of microprocessor that the server supports and other information that
you must consider when you install a microprocessor and water loop:

• Microprocessors are to be installed only by trained technicians.

Important:

Always use the

microprocessor installation tool to install a microprocessor. Failing to use the microprocessor installation
tool may damage the microprocessor sockets on the system board. Any damage to the microprocessor
sockets may require replacing the system board.

• The server supports up to four

®

Intel Xeon™ E5-2600 v4 series multi-core microprocessors. See http://

www.lenovo.com/ serverproven/ for a list of supported microprocessors.

• Do not mix microprocessors with different cores in the same server.

184

Lenovo NeXtScale nx360 M5 water-cooled technology tray Lenovo NeXtScale n1200 Enclosure Installation and Service Guide

«
...
196
197
198
199
200
...
»

Содержание NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов