Lenovo NeXtScale n1200 Скачать руководство пользователя страница 165

Страница: 165 / 878

Torx head screws

Figure 58. Torx head screws removal

Step 4. Place the drive cages on the water-cooled technology tray.

Drive cages

Figure 59. Drive cage installation

Step 5. Install the three screws that secure the Solid State drive cage to the water-cooled technology tray.

Step 6. Reinstall the hard disk drives/solid state drives and route the cables as instructed (see “Replacing a

hard disk drive (HDD)/solid state drive (SSD)” on page 153).

Step 7. Reinstall the cover (see “Replacing the cover” on page 142).

Step 8. Slide the compute node into the rack.

Step 9. Reconnect the power cords and any cables that you removed.

Step 10. Turn on the peripheral devices and the compute node.

Removing a hard disk drive (HDD)/solid state drive (SSD)

Use this information to remove a hard disk drive (HDD)/solid state drive (SSD).

Read the safety information in Safety and Installation guidelines.

Chapter 6

Removing and replacing server components

151

Содержание NeXtScale n1200















































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NeXtScale n1200

Отзывы:

Lenovo NeXtScale n1200, Инструкция по установке и обслуживанию, Страница: 165 / 878

Результаты поиска

Содержание NeXtScale n1200

Отзывы: