Lenovo IdeaPad FLEX Series, Руководство пользователя

Страница: 29 / 72

Chapter 4. Secure your computer and information
Use passwords
This section introduces types of passwords in UEFI (Unified Extensible Firmware Interface) or BIOS (Basic
Input/Output System) and how to set, change, and remove a password.
Password types
You can set various passwords in the UEFI/BIOS setup utility.
Password type Pre-requisite When set
Administrator password No You must enter it to start the setup
utility.
User password The administrator password must be
set. You can use the user password to start
the setup utility.
Master hard disk password No You must enter it to start the operating
system.
User hard disk password The master hard disk password must
be set. You can use the user hard disk
password to start the operating system.
Notes:
• All passwords set in the setup utility consist of alphanumeric characters only.
• If you start the setup utility using the user password, you can only change a few settings.
Set administrator password
You set the administrator password to prevent unauthorized access to the UEFI/BIOS setup utility.
Attention: If you forget the administrator password, a Lenovo authorized service personnel cannot reset
your password. You must take your computer to a Lenovo authorized service personnel or a marketing
representative to have the system board replaced. Proof of purchase is required and a fee will be charged for
parts and service.
1. Start the UEFI/BIOS setup utility.
2. Select Security ➙ Set Administrator Password and press Enter.
3. Enter a password string that contains only letters and numbers. Then, press Enter.
4. Enter the password again and press Enter.
5. Select Exit
➙
Exit Saving Changes .
Next time you start the computer, you must enter the administrator password to start the setup utility. If
Power on Password is enabled, you must enter the administrator password or the user password to start
the computer.
Change or remove administrator password
Only the administrator can change or remove the administrator password. If you remove the administrator
password, the user password will also be removed.
1. Start the UEFI/BIOS setup utility using the administrator password.
© Copyright Lenovo 2019
23