Lenovo G8000, Руководство по эксплуатации продукта

Страница: 3 / 18

Switch Seal Kit (00Y3001) that are used when the switch is installed in the Intelligent Cluster® Rack (MT 1410),
Enterprise Rack (MT 9363), or PureFlex® System Rack (MT 9363) with NeXtScale™ System. The G8000 (front-to-
rear airflow) switch also supports 4-post iDataPlex® rack kit (90Y3535) which is used when the switch is installed
in the iDataPlex Rack.
The RackSwitch G8000 switch comes with two redundant fixed 150 W AC power supplies. Each internal power
supply has an individual IEC 320-C14 power connector on the rear panel. Power cables are not included and must
be ordered separately (see Table 2 for details). Two power cables are required per switch.
Table 2. Power cables
Description Part number Feature code for
MTM 0446-HC3 and
7309-HCC
Rack power cables
1.5m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable
39Y7937 6201
2.8m, 10A/100-250V, C13 to IEC 320-C20 Rack Power Cable 39Y7938* 6204*
4.3m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable 39Y7932 6263
Country-specific power cords
European 10A line C13 to CEE 7/7 (2.8M)
39Y7917 6212
Denmark 10A line C13 to DK2-5A (2.8M) 39Y7918 6213
Switzerland 10A line C13 to SEV 1011 (2.8M) 39Y7919 6216
Israel 10A line C13 to SI 32 (2.8M) 39Y7920 6218
South Africa 10A line C13 to SABS 164/1 (2.8M) 39Y7922 6214
United Kingdom 10A line C13 to BS 1363 (2.8M) 39Y7923 6215
Australia/NZ 10A line C13 to SAA-AS C112 (2.8M) 39Y7924 6211
Korea 7A line C13 to KETI 15A/250V (2.8M) 39Y7925 6219
India 6A line C13 to Fig 68 (2.8M) 39Y7927 6269
China 6A line C13 to GB 2099.1 (2.8M) 39Y7928 6210
Brazil 10A line C13 to NBR 6147 (2.8M) 39Y7929 6223
Argentina 10A line C13 to IRAM 2063 (2.8M) 39Y7930 6222
10A/250V C13 to NEMA 6-15P 2.8m power cord 46M2592* A1RF*
Japan 10A/100V C13 to JIS C-8303 2.8m power cord 46M2593* A1RE*
Line cord - 4.3M, 10A/125V, C13 to NEMA 5-15P (US) 39Y7931** 6207**
Japan 7A line C13 to JIS C-8303-1983 Denan (4.3M) 39Y7926** 6335**
* The option is not available for MTM 0446-HC3.
** The option is not available for MTM 7309-HCC.
Supported cables and transceivers
With the flexibility of the G8000 switch, clients can take advantage of the technologies that they require for multiple
environments:
For 1 GbE links, clients can use RJ-45 UTP cables up to 100 m. Clients that need longer distances can
leverage the SFP ports by using a 1000BASE-SX transceiver, which can drive distances up to 220 meters
by using 62.5 µ multi-mode fiber and up to 550 meters with 50 µ multi-mode fiber or the 1000BASE-LX
transceivers that support distances up to 10 kilometers using single-mode fiber (1310 nm).
For 10 GbE links (supported with optional uplink modules), clients can choose SFP+ or 10GBASE-CX4
connectivity. With SFP+ ports, clients can use direct-attached copper (DAC) SFP+ cables for in-rack
RackSwitch G8000 3