Lenovo Flex System x220, Инструкция по установке и обслуживанию

Страница: 592 / 714

A fatal bus error is no longer detected in the I/O expansion adapter in PCIe adapter slot 4 in the PCI
expansion unit.
May also be shown as 816f0a133104ffff or 0x816f0a133104ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix: PLAT ID: 0245
User Response
Information only; no action is required.
UEFI diagnostic codes
UEFI diagnostic codes can be generated when the compute node starts or while the compute node is
running. UEFI diagnostic codes are logged in the IMM event log in the compute node.
UEFI diagnostic code fields
For each event code, the following fields are displayed:
Event identifier
An identifier that uniquely identifies an event.
Event description
The logged message string that appears for an event.
Explanation
Additional information to explain why the event occurred.
Severity
An indication of the level of concern for the condition. In the event log, the severity is abbreviated
to the first character.
• Info: The event was recorded for audit purposes, usually a user action or a change of states that is
normal behavior.
• Warning: The event is not as severe as an error, but if possible, the condition should be corrected
before it becomes an error. It might also be a condition that requires additional monitoring or
maintenance.
• Error: The event is a failure or critical condition that impairs service or an expected function.
User response
The actions that you should perform to solve the event.
584
Flex System x220 Compute Node Installation and Service Guide