Cabling requirements
Table 10 lists the cables required for the switch.
Table 10. FC5022 cabling requirements
Transceiver
Cable
Connector
16 Gb Fibre Channel
16 Gb FC SW SFP+ Module Up to 30 m with fiber optic cables supplied by Lenovo (see Table
2); 850 nm OM3 multimode fiber up to 100 m or OM4 multimode
fiber up to 125 m
LC
16 Gb FC LW SFP+ Module 1310 nm single-mode fiber cable (9 µ) up to 10 km
LC
16 Gb FC ELW SFP+
Module
1310 nm single-mode fiber cable (9 µ) up to 25 km
LC
8 Gb Fibre Channel
8 Gb FC SW SFP+ Module
Up to 30 m with fiber optic cables supplied by Lenovo (see Table
2); 850 nm OM3 multimode fiber up to 150 m
LC
8 Gb FC LW SFP+ Module
1310 nm single-mode fiber cable (9 µ) up to 10 km
LC
8 Gb FC ELW SFP+ Module 1310 nm single-mode fiber cable (9 µ) up to 25 km
LC
Management ports
External 1 GbE management
port
UTP Category 5, 5E, and 6 up to 100 meters
RJ-45
External RS-232
management port
DB-9-to-mini-USB or RJ-45-to-mini-USB console cable (comes with
optional Management Serial Access Cable, 90Y9338)
Mini-USB
Warranty
The FC5022 switches carry a 1-year, customer-replaceable unit (CRU) limited warranty. When installed in a
chassis, these switches assume your system’s base warranty and any Lenovo warranty service upgrade.
Physical specifications
The approximate dimensions and weight of the switch are as follows:
Height: 30 mm (1.2 in.)
Width: 401 mm (15.8 in.)
Depth: 317 mm (12.5 in.)
Weight: 3.2 kg (7.1 lb)
The shipping dimensions and weight (approximate) of the switch are as follows:
Height: 114 mm (4.5 in.)
Width: 508 mm (20.0 in.)
Depth: 432 mm (17.0 in.)
Weight: 3.6 kg (8.1 lb)
Operating environment
Lenovo Flex System FC5022 16Gb SAN Scalable Switches
15
