Lenovo E50-05 Series, Руководство по техническому обслуживанию аппаратной части

Страница: 47 / 57

Step 6. Disconnect the data cables from the connectors on the motherboard.
Step 7. Remove the screw that secures the front I/O assembly to the chassis.
Step 8. Slide the I/O assembly out of the chassis.
Step 9. To remove the USB bracket, lever up the bracket’s four pins with a screwdriver, then pull the front
I/O board out of the bracket.
1
1
2
Step 10. To install the new front I/O board:
a. Push the new front I/O board into the bracket, then press down the four clips until they lock
into place.
b. Slide the front I/O assembly in and secure it with the screw.
c. Connect the data cables to the motherboard.
Step 11. Reattach the front bezel, then reattach the computer cover.
Chapter 8
.
Replacing hardware
41