Lenovo 7Y54, Руководство по обслуживанию

Страница: 82 / 138

Figure 70. ID label installation
2. Reinstall the security bezel if it is removed (see “Install the security bezel” on page 75 ).
3. Install the server into the rack if necessary.
4. Reconnect power cords and all external cables.
Security bezel replacement
Use this procedure to remove or install the security bezel.
Remove the security bezel
Use this information to remove the security bezel.
Before removing the security bezel:
1. Read “Safety” on page iii and “Installation Guidelines” on page 31 to ensure that you work safely.
2. If the server is installed in a rack, extend or remove the server from the rack.
To remove the security bezel, complete the following steps:
Step 1. Use the key to unlock the security bezel to the open position.
Figure 71. Unlocking the security bezel
Step 2. Press the release latch and rotate the security bezel outward to remove it from the chassis.
74
ThinkSystem SR150 Maintenance Manual