Lenovo 7Y45, Руководство по установке

Страница: 101 / 116

Note:
The KCS access method uses the IPMI/KCS interface, which requires that the IPMI
driver be installed.
– Remote LAN access, type the command:
[
−−bmc
xcc_user_id:xcc_password@xcc_external_ip]
Where:
xcc_external_ip
The BMC/IMM/XCC external IP address. There is no default value. This parameter is
required.
xcc_user_id
The BMC/IMM/XCC account name (1 of 12 accounts). The default value is USERID.
xcc_password
The BMC/IMM/XCC account password (1 of 12 accounts).
Note:
BMC, IMM, or XCC external IP address, account name, and password are all valid for
this command.
Example command is as follows:
onecli config set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value>
−−bmc
xcc_user_id:xcc_password@xcc_external_ip
4. Restart the Lenovo XClarity Controller.
5. Restart the server.
Update the asset tag
Optionally, you can update the asset tag.
There are two methods available to update the asset tag:
• From Lenovo XClarity Provisioning Manager V3
To update the asset tag from Lenovo XClarity Provisioning Manager V3:
1. Start the server and press F1 to display the Lenovo XClarity Provisioning Manager V3 interface.
2. If the power-on Administrator password is required, enter the password.
3. From the System Summary page, click
Update VPD
.
4. Update the asset tag information.
• From Lenovo XClarity Essentials OneCLI
Lenovo XClarity Essentials OneCLI sets the asset tag in the Lenovo XClarity Controller. Select one of the
following methods to access the Lenovo XClarity Controller and set the asset tag:
– Operate from the target system, such as LAN or keyboard console style (KCS) access
– Remote access to the target system (TCP/IP based)
To update the asset tag from Lenovo XClarity Essentials OneCLI:
1. Download and install Lenovo XClarity Essentials OneCLI.
To download Lenovo XClarity Essentials OneCLI, go to the following site:
https://datacentersupport.lenovo.com/solutions/HT116433
2. Copy and unpack the OneCLI package, which also includes other required files, to the server. Make
sure that you unpack the OneCLI and the required files to the same directory.
Chapter 4
.
System configuration
97