Lenovo 7D8J, Руководство по установке, Страница: 106 / 122

Step 1. Start the Setup Utility program, see “Starting the Setup Utility program” on page 101.
Step 2. Select
Devices
.
Step 3. Select the device to enable or disable, and press
Enter
.
Step 4. Select the desired setting, and press
Enter
.
Step 5. To save settings and exit the Setup Utility program, press
F10
; then, select
Yes
in the displayed
window, and press
Enter
.
Enabling or disabling the automatic power-on
Automatic Power On in Setup Utility program provides various power-on options.
To enable or disable Automatic Power On, complete the following steps:
Step 1. Start the Setup Utility program, see “Starting the Setup Utility program” on page 101.
Step 2. Select
Power
➙
Enhanced Power Saving Mode
and press
Enter
.
Step 3. Select the feature you want to enable or disable, and press
Enter
.
Step 4. Select the desired option, and press
Enter
.
Step 5. To save settings and exit the Setup Utility program, press
F10
; then, select
Yes
in the displayed
window, and press
Enter
.
Acoustic/Thermal optimal performance
Intelligent Cooling Performance Mode menu allows you to adjust server performance to achieve optimal
acoustic or thermal conditions.
Note:
When
Load Optimal Defaults
is selected, the Intelligent Cooling Performance Mode will return to its
default settings as
Best Performance
. Make sure to set the Performance Mode according to your system
configuration.
Three modes are available in Performance Mode menu:
•
Best Experience:
This mode allows the server to work with less noise at normal thermal level, and applies
to the following configuration:
– Up to two drives, zero or one M.2 drive module, and zero or one slime OSS
– Up to one PCIe adapter (not including GPU adapter)
•
Best Performance:
This mode allows the server to work at a lower thermal level with normal acoustic
performance, and applies to the following configuration:
– Up to three drives, zero or one M.2 drive module, and zero or one slime OSS
– Up to one PCIe adapter (not including GPU adapter)
•
Full Speed:
This mode allows the server to work with optimal performance. There is no limitation of drive
or adapter configuration for this mode, but there will be more acoustic noise.
To switch between better acoustic and thermal performance mode, complete the following steps:
Step 1. Start the Setup Utility program, see “Starting the Setup Utility program” on page 101.
Step 2. Select
Power
➙
Intelligent Cooling
and press
Enter
.
Step 3. Select
Performance Mode
and press
Enter
.
Step 4. Select the desired option, and press
Enter
.
102
ThinkSystem ST50 V2 Setup Guide