Lenovo 66A3-GACB-WW, Руководство пользователя

Страница: 16 / 27

Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This is
normal and the image can be readjusted using automatic image setup and the image
controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Curved Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-attach
the CRT monitor temporarily until you have re-configured the system; preferably to
1920x1080
at 165Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3.Factory set display modes
Understanding power management
Power management is invoked when the computer recognizes that you have not using
your mouse or keyboard for a user-definable period. There are several states as described in
the table below.
For optimal performance, switch off your monitor at the end of each working day, or
whenever you expect to leave it unused for long periods during the day.
Table2-4.Power indicator
State Power Indicator Screen Restoring Operation Compliance
On Steady White Normal
Standby/
Suspend
Steady amber Blank
Press a key or move the
mouse.
There may be a slight delay
reappears.
Note: Standby also occurs
if there is no image output to
the monitor.
Off Off Off Press power key to switch on
There may be a slight delay
before the image reappears.
Chapter 2. 2-6
Addressability
Refresh rate
640x480 60Hz, 72Hz,75Hz
720x400 70Hz
800x600 56Hz, 60Hz,72Hz,75Hz
832x624 75 Hz
1024x768 60Hz,70Hz
1152x864 75Hz
1280x1024 60Hz,70Hz,75Hz
1366x768 60Hz
1680x1050 60Hz
1600x900 60Hz
1920x1080
60Hz , 75Hz, 120Hz,144Hz ,165Hz
1280x 720 60Hz