Lenovo 66A3-GACB-WW, Руководство пользователя

Страница: 14 / 27

Chapter 2. 2-4
Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
Icon Control Description
Input change
Switches the video input source.
Brightness Direct access to Brightness adjustment.
Main menu
Open OSD main menu
Using the On-Screen Display (OSD) controls
The settings adjustable with the user controls are viewed through the On-Screen Display (OSD),
as shown below.
To use the controls:
1. Press to open the main OSD menu.
2. to access that
Use or to move among the icons. Select an icon and press
function. If there is a sub-menu, you can move between options using
or , then
to make adjustments. Press to
press to select that function. Use or
save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD
and allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold the buttons for 10
seconds to disable/enable DDC/CI function. The words " DDC/CI
Disable/DDC/CI/Enable" shows on the screen.
Press and hold for 10 seconds will lock
menu/unlock menu
DDC-CI
Press and hold for 10 seconds to
enable or disable the DDC-CI function
NO function
Low Blue Light
Press and hold for 3 seconds will enable or
disable the Low Blue Light