Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
Icon
Control
Description
1
Left
Return to the previous menu page or exit from the
previous function.
2
UP
UP browsing key
For increasing the value on adjustment bar/tune in
3
Input Source
Switches the video input source. Press and hold for 10
seconds to Enable/Disable the "DDC/CI" .
4
Down
Down browsing key.
For decreasing the value on adjustment bar/tune in.
5
M
enu
To access OSD menu.
Press to confirm selection.
Press and hold for 10 seconds will lock menu/un-lock
menu.
6
Right
Press to enter next level on main menu/sub menu
status or enter previous level on adjustment bar.
2-3 P27h-30 Flat Panel Monitor User’s Guide
