Lenovo 6241 Скачать руководство пользователя страница 207

Страница: 207 / 1990

Software problems

Use this information to solve software problems.

Table 52. Symptoms and user actions for software problems

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• See Chapter 5 “

Parts listing, System x3850 X6 and x3950 X6 Type 6241

” on page 201 to determine which

components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

• If an action step is preceded by

(Trained service technician only)

, that step must be performed only by a

Trained service technician.

Symptom

Action

You suspect a software
problem.

1. To determine if a software problem exist, verify the following:

a. If a new hardware, software, firmware or device driver has been installed or

updated, verify that it is supported on the server by checking the
ServerProven list at

http://www.lenovo.com/serverproven/

2. If you received any error messages when using the software, see the

information that comes with the software for a description of the messages and
suggested solutions to the problem.

3. Check the operating system logs for any events related to your software and

attempt to resolve them.

4. Contact your software provider for additional problem resolution.

5. Contact the software vendor.

Universal Serial Bus (USB) port problems

Use this information to solve Universal Serial Bus (USB) port problems.

Table 53. Symptoms and user actions for USB port problems

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is

solved.

• See Chapter 5 “

Parts listing, System x3850 X6 and x3950 X6 Type 6241

” on page 201 to determine which

components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

• If an action step is preceded by

(Trained service technician only)

, that step must be performed only by a

Trained service technician.

Symptom

Action

A USB device does not work.

1. Use the Setup utility to make sure that the device is configured correctly (see

“Using the Setup utility” on page 123).

2. Make sure that the correct drivers are installed on the server. See the

production documentation for the USB device or the manufacturer’s website for
information about the device drivers.

3. If the USB device is connected into the hub or the console breakout cable,

unplug the device and connect it into the USB port on the front of the server.

Chapter 4

Troubleshooting

193

Содержание 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 6241

Отзывы:

Похожие инструкции для 6241

Бренды по названию

Популярные бренды

Lenovo 6241, Инструкция по установке и обслуживанию

Результаты поиска

Содержание 6241

Отзывы:

Похожие инструкции для 6241

Бренды по названию

Популярные бренды