Lenovo 6241, Инструкция по установке и обслуживанию

Страница: 156 / 1990

asu set SYSTEM_PROD_DATA.SysInfoUUID
uuid
[--host
ipaddress
]
[--user
userid
][--password
password
]
where:
uuid
is the user-assigned hexadecimal value, up to 16 bytes, that identifies the server.
ipaddress
is the internal LAN/USB IP address of the IMM. The default is 169.254.95.118.
userid
is the IMM account name (1 of 12 accounts). The default is USERID.
password
is the IMM account password (1 of 12 accounts). The default is PASSW0RD (with a zero, not the letter
O).
To update the DMI/SMBIOS data, complete the following steps:
Step 1. In the ASU command-line interface, enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoProdName
xxxxyyy
[--host
ipaddress
]
[--user
userid
][--password
password
]
where:
xxxx
is the 4-digit machine type of the server.
yyy
is the 3-digit model number of the server.
ipaddress
is the internal LAN/USB IP address of the IMM. The default is 169.254.95.118.
userid
is the IMM account name (1 of 12 accounts). The default is USERID.
password
is the IMM account password (1 of 12 accounts). The default is PASSW0RD (with a zero, not
the letter O).
Step 2. Enter the following command:
asu set SYSTEM_PROD_DATA.SysInfoSerialNum
zzzzzzz
[--host
ipaddress
]
[--user
userid
][--password
password
]
where zzzzzzz is the 7-character serial number of the server.
Step 3. Enter the following command:
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
[--host
ipaddress
]
[--user
userid
][--password
password
]
where aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the 33-character asset tag number of the server.
Remotely over a LAN
This topic provides instructions on how to update the Universal Unique Identifier and DMI/SMBIOS data on
the server remotely over a LAN.
To update the UUID in the ASU command-line interface, enter the following command:
Note: If you omit any optional parameter, the default value is used.
142
System x3850 X6 and x3950 X6 Installation and Service Guide