Lennox VE2C009N432U, Руководство по установке, Страница: 21 / 32

Multi Variable Air Conditioners Two-way Cassette Type Indoor Unit
16
4.4.2 Panel Installation
(1) Adjust the panel direction. Let the swing motor on the panel keep the same side with
connection pipe.
Fig 4.4.4
(2) Adjust the position of panel to make the panel holes fix at the holes on the unit.
(3) Fix the 4 screws at the two side of panel and then fix the 2 screws in the middle of panel.
(4) Install the air inlet grille and then lock the clasp.
(5) Tighten the screw until the thickness of sealing material between panel and indoor unit is
about 5~8mm.
Fig 4.4.5
4.5 Installation of Wired Controller
Wired controller is optional accessory. If wired controller is needed, please contact your local
dealer and install the wired controller according to the instruction manual.
NOTE: Do perform the commissioning operation before first use; automatic addressing or
other settings, please refer to the manual of ODU.