Lennox B050A3B, Инструкция по установке/обслуживанию и руководство для пользователя

Страница: 27 / 36

506307-01 Page 27 of 36 Issue 1207
** “c) MANUFACTURER REQUIREMENTS - GAS EQUIPMENT VENTING SYSTEM PROVIDED. When
the manufacturer of Product Approved side wall horizontally vented gas equipment provides a venting
system design or venting system components with the equipment, the instructions provided by the
manufacturer for installation of the equipment and the venting system shall include:
1. Detailed instructions for the installation of the venting system design or the venting system components;
and
2. A complete parts list for the venting system design or venting system.
(d) MANUFACTURER REQUIREMENTS - GAS EQUIPMENT VENTING SYSTEM NOT PROVIDED. When
the manufacturer of a Product Approved side wall horizontally vented gas fueled equipment does not
provide the parts for venting the flue gases, but identifies “special venting systems”, the following
requirements shall be satisfied by the manufacturer:
1. The identification of each “special venting system” shall include the listing of either the website, phone
number or manufacturer’s address where the venting system installation instructions can be obtained;
and
2. The “special venting systems” shall be Product Approved by the Board, and the instructions for provided
with that system shall include a parts list and detailed installation instructions.
(e) A copy of all installation instructions for all Product Approved side wall horizontally vented gas fueled
equipment and all the venting instructions, parts lists, and/or design instructions for the venting system
shall remain with the appliance or equipment at the completion of the installation.”
* Text from Commonwealth of Massachusetts Official Website of the Office of Consumer Affairs & Business Regulation
(OCABR).
** Text from Joseph A Peluso, Jr. (Executive Director Board of State Examiners of Plumbers and Gas Fitters,
Commonwealth of Massachusetts) letter of April 24, 2007 to GAMA.