background image

MISCELLEOUS

KITS AND ACCESSORIES

©

2018 Lennox Industries Inc. 

Dallas, Texas, USA

ETHERNET CONVERTER KIT 

(For L Connection Network)

507676-01

8/2018

Supersedes 9/2017

INSTALLATION INSTRUCTIONS FOR ETHERNET CONVERTER KIT (76M77) 

(Used with the L Connection Network)

THIS MANUAL MUST BE LEFT WITH THE OWNER 

FOR FUTURE REFERENCE

WARNING

Installation and service must be performed by a li censed 

professional HVAC installer (or equivalent) or a service 

agency.

Shipping and Packing List

Package 1 of 1 contains:
1 - Ethernet converter
1 - Ethernet cable
1 - RS-232 serial cable
1 - Power transformer

Application

The Ethernet Converter Kit is required to interface 

between the 

L Connection

®

 network and an Ethernet local 

area network (LAN). This allows

 L Connection

 software to 

access L Connection products through an Ethernet port 

instead of connecting directly or through a modem. See 

figure 1. 

The 

L Connection

 network provides direct digital 

communication to a single or network of 

L Connection 

products such as 

IMC (M1−x)

M2

 and 

M3 Prodigy

®

NTC

 

rooftop unit controllers, 

BC

 building controllers and 

NCP

 

network manager.

NOTE: 

Unit controller and network control panel software 

are ordered separately.

There are two available options (Option 1 or 2) for 

setting up this device that are discussed further on in this 

instruction.

LED Indicators

Table 1.  LEDs

LED Label

Function

POWER

Indicates unit has power.

WORK

When blinking on and off in a steady manner, 

this indicates the Ethernet Converter is working 

properly. If LED is on or off for a long period, 

then there is an error and it is recommended 

to power off the Ethernet Converter and then 

power it up to resolve the communication error.

232TX

Blinking LED indicates that the Ethernet 

Converter is sending RS232 data.

232RX

Blinking LED indicates that the Ethernet 

Converter is receiving RS232 data.

485TX

Blinking LED indicates that the Ethernet 

Converter is sending RS485 data.

485RX

Blinking LED indicates that the Ethernet 

Converter is receiving RS485 data.

Figure 1.  Ethernet Converter Kit

Отзывы: