6. RFQ
Q1: No image output?
A1: Check the led indicator status to make sure all connections are
good and stable.
Q2: Signal led “3” is flashing but no image output?
A2:Check if the HDMI display device has been switched to the right
HDMI input channel.
Q3: Signal led “2” is flashing but “3” light is off?
A3: Check whether the TX' HDMI IN has signal input and make sure
RX's HDMI OUT is well connected with HDMI display .
Q4: Output image has flashing points or disturbance points?
A4: Change TX' HDMI signal input cable or use shorter HDMI cable.
7. SPECIFICATION
Items
Power supply
HDMI signal
resolution Supported
Network cable
Transmission length
Infrared back
Power consumption
Product dimension
Specifications
4KX2K, compatible with HDCP; support CEC
and 24bits deep color
Support 20~60kHz wide frequency devices and
Bi-directional IR transmission
Note
2pcs
HDBaseT HDMI Extender over single CAT 5/6/7
User's manual
