Lencore MPI-2 LOCAL, Руководство пользователя

Страница: 5 / 20

Features and Capabilities
•
Front panel LEDs. Various front panel LEDs indicate various functions
and activity of the unit.
•
Analog phone input.
•
Built-in speaker for testing/troubleshooting.
•
Audio Test button. The Audio Test button is used to play pre-recorded
music for testing/troubleshooting the paging lines.
•
Single turn pot to adjust the paging and music input signals levels.
•
Ability to connect a Global MPI.
Inputs
•
Power input.
•
Analog phone line input (RJ11).
•
Ground 2-pos terminal block (screw terminals).
•
Microphone inputs (individual wires and RCA).
•
Music inputs (RCA).
•
Global MPI (RJ45).
•
Data from the head-end (RJ45).
•
Break tones 4-pos terminal block (screw terminals).
•
Doorbell 4-pos terminal block (screw terminals).
•
Message Triggers 6-pos terminal block (screw terminals).
Output
•
Data output to OPs (RJ45) with two audio sources.
LEDs
•
Power
– solid when the unit is powered.
•
Status
–
blinks during boot-up and audio test, solid when paging or IR
remote button is pressed.
•
Page On
– solid during an active page.
•
Audio input level
– two sets of three LEDs for paging and music input level
detection. Yellow = low or no input. Blue = good audio level. Red = audio
input too high.
•
Activity - Rx
– blinks when Neuron is receiving data Tx – blinks when
Neuron is transmitting data.
2