Lencore MPI-2 LOCAL, Руководство пользователя

Страница: 14 / 20

Audio Test pushbutton
The audio test pushbutton is used to play a pre-recorded music clip over the
paging lines. This is used for testing and troubleshooting purposes. Press the
Audio Test button one and the Status LED will blink while a pre-recorded sound
clip plays over the speakers using the paging lines. Note that the paging volume
for the speaker channels must be turned on using System Manager prior to
initiating the test.
Page On/Off pushbutton
The page on/off pushbutton is used to toggle the page on and off command.
This is used for testing and troubleshooting purposes. Press the Page On/Off
once to initiate a page and a second time to tun the page off. The Page On LED
will stay on until the page is manually turned off indicating that a page is in
process.
Status/Page On LEDs
The Status LED indicates that the internal microprocessor is functioning
normally. The Page On LED indicates an active page is in progress.
11