-12-
BASIC OPERATION
PLAY/ENTER
Press PLAY/ENTER button to playback or enable the selected items.
CLEAR
Press CLEAR button to cancel the digital you have inputted. For example: the setting of programmed
songs.
STANDBY
Press the STANDBY button on the remote control can switch to the standby mode. Before you perform
the operation, make sure the main power is on.
Note: This standby function is one kind of saving electricity modes. When the device does not be used for
a long time, please disconnect the main power.
INPUT SELECTION
1)
Correctly connect the outer equipment (e.g. PC computer) with this unit, then press the AUDIO-IN
button on the remote control (or AUDIO on front panel) to enter Audio status and enjoy the outer
audio source.
2)
Press the FM button on the remote control (or front panel) to select tuner.
3)
Press the DVD button on the remote control (or on the front panel) to select DVD mode. The unit will
start playing if there is a disc inserted.
TONE
If you want to adjust the volume of Treble, Bass or Subwoofer. First to press the TONE button, select to
the corresponding item and press Vol+/- button on the remote control can increase or reduce the volume
of Treble, Bass or Subwoofer.
ZOOM
In play status every time the ZOOM button is pressed, the TV screen will be zoomed in or out
proportionally. In case of zoom proportion more than 1, pressing direction button is able to move the
picture, continuously press the button, the TV screen display will be zoomed in 2 times, 3 times, 4 times,
1/2 time, 1/3 time, 1/4 time.
SHORTCUT
When play DVD discs, press the SHORTCUT button to jump over the initial title, menu or warnings.
(Only for some discs, subject to the quality or recorded status of the played discs)
