WATERPROOF CAMERA CASE INSTRUCTIONS
For information and support :
www.lenco.eu
*
With this Shade, images can be seen more clearly under strong sunlight.
Utilisation du boîtier étanche
Pour information & support technique,
www.lenco.eu
*
Avec ce cache les images appara claires sous haute lumiére
①
Press the 2 Side Buttons.
②
Pull the side tab upwards.
③
Pull the other side tab outwards and then up.
①
Put the side tab with the hook back onto the case.
②
Push the other side tab down until hear the "pop" sound to
lock the case and seal the water out.
Note:
* The unit can be used under water up to 10m depth
* Use Temperature: 0 to 40 , Storing Temperature: -20 to 60
(Keep away from direct heat, sunlight and extreme temperature)
* Clean and make sure no dirt (such as sand, etc), sticks on the Rubber Seal Ring before locked
* Please use the Hand strap under parent's guidance
* Do not drop the whole unit.
* After use in salt water, please clean the waterproof case with clear water as salt will damage the rubber
Open the case:
Close the case:
Ouvrir le boîtier:
Fermer le boîtier:
①
Appuyer sur les 2 boutons de coté
②
Remonter le mécanisme de fermeture
.
③
Décrocher la partie inférieure de la fermeture
.
①
Enclencher le crochet de la partie inférieure
②
Pousser sur la partie supérieure pour fermer le
boîtier et le rendre étanche.
